Call Us Now! +86-551-63853683 Sales@climatechambers.com
You are here:Home >> Support >> Latest News

Support

Support

Contact Us

Symor Instrument Equipment Co.,Ltd
Email: Sales@climatechambers.com
Tel: +86-551-63853683, 68663630
Shanghai office 
No.3215,Huhang Highway,Fengxian District, Shanghai, 231417,China
Hefei office
No.105 Dayang Industrial Park
Luyang District, Hefei, 230041, China

Latest News

What are the Troubleshooting Methods of Temperature and humidity Test Chamber?

Temperature and humidity test chamber is mainly suitable for:
1.high and low temperature humdity test
2.constant temperature humdiity test
3.storage test of electrical and electronics, components, materials and various electronic components
The Temperature and humidity test chamber cost is quite high, and the quality should be guaranteed.


Now we will mainly analyze the common faults and troubleshooting methods of the temperature and humidity test chamber
1.When doing the high temperature test, if the temperature change does not reach the set value.
1) If the temperature rises very slowly, check the air circulation system, see whether the regulating baffle is open,
2) check whether the motor of air circulation is running or not.If the temperature overshoots, pls complete the setting parameters of the PID. If the temperature rises directly, then the controller fails and changes the controller.

2.Low temperature can not reach the test index
1).Observe the change of temperature, is the temperature drop very slow, or the temperature to the certain temperature will recover, pls check the former 
2).Check the working chamber is dry before low temperture test
3).Whether the test samples placed too much, make the working wind can not fully cycle
4).Wether the ambient temperature is poor
Also in our operation manual,there is requirement of the ambient condition and the correct location in the end user‘s laboratory.

After excluding the above reasons, consider whether the fault in the refrigeration system, so to ask the manufacturer‘s technicians for maintenance.

Symor Instrument Equipment Co.,Ltd is the earliest environmental test chamber manufacturer in China,with unique technical advantages,welcome for inquiries.

Copyright © 2001-2021 Symor Instrument Equipment Co., Ltd. All Rights Reserved